MAN D2862LE476 motor para MAN D2862LE476
≈ 4,21 PEN
Hörsching7279 km to "United States/Columbus"
Si decide comprar maquinaria a un precio inferior, póngase en contacto con el verdadero vendedor. Recopile toda la información que le sea posible sobre el propietario de la maquinaria. Una forma de engaño es presentarse como empresa. En caso de sospecha, infórmenos mediante el formulario de comentarios y sugerencias para que lo comprobemos.
Antes de confirmar una compra, revise detenidamente varias ofertas de venta para ver cuál es el precio medio del equipo elegido. Si el precio de la oferta que le interesa es mucho menor que el de ofertas similares, piénselo dos veces. Una diferencia de precio significativa puede conllevar a defectos ocultos o a un intento de fraude por parte del vendedor.
No compre productos cuyo precio diste mucho del precio medio de equipos similares.
No acepte compromisos dudosos o mercancías con prepago. Si no lo tiene claro, no dude en solicitar aclaraciones, pida fotos adicionales y documentos del equipo, compruebe la autenticidad de los mismos y pregunte todo lo necesario.
Esta es la forma más habitual de fraude. Ciertos vendedores pueden requerir una cantidad del pago por adelantado en concepto de «reserva» de su compra. Así, los estafadores perciben grandes cantidades de dinero y después desaparecen sin dejar huella.
- Transferencia de prepago a la tarjeta
- No realice un pago por adelantado sin documentación que confirme el proceso de transferencia de dinero, si durante la comunicación con el vendedor ha surgido alguna duda.
- Transferencia a una cuenta «fiduciaria»
- Dicha solicitud debe alarmarle, ya que en la mayoría de los casos se trata de fraudes.
- Transferencia a una cuenta de una empresa con un nombre similar
- Tenga cuidado, ya que los estafadores pueden ocultarse tras la identidad de empresas reconocidas, realizando modificaciones mínimas en su nombre. No transfiera dinero si tiene dudas sobre el nombre de la empresa.
- Sustitución de sus propios datos en la factura de una empresa real
- Antes de realizar una transferencia, asegúrese de que los datos especificados sean correctos y que aludan a la empresa en cuestión.
Contactos del vendedor
+358 50 53...
Mostrar
+358 50 5345498
+358 9 231...
Mostrar
+358 9 23165797
Austria 
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Francia, Rouillac
Austria, Hörsching
Finlandia, Helsinki
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor