El anuncio Fresh HB Groep equipo de secado se ha vendido y no está incluido en la búsqueda.
Anuncios similares
Fresh HB Groep equipo de secado
Vendido
Fresh HB Groep equipo de secado
Fresh HB Groep equipo de secado imagen 2
Fresh HB Groep equipo de secado imagen 3
Fresh HB Groep equipo de secado imagen 4
Fresh HB Groep equipo de secado imagen 5
Fresh HB Groep equipo de secado imagen 6
Fresh HB Groep equipo de secado imagen 7
Fresh HB Groep equipo de secado imagen 8
Fresh HB Groep equipo de secado imagen 9
Fresh HB Groep equipo de secado imagen 10
Fresh HB Groep equipo de secado imagen 11
Fresh HB Groep equipo de secado imagen 12
Fresh HB Groep equipo de secado imagen 13
Fresh HB Groep equipo de secado imagen 14
Fresh HB Groep equipo de secado imagen 15
1/15
Marca:  Fresh
Modelo:  HB Groep
Tipo:  equipo de secado
Año de fabricación:  2004
Ubicación:  Alemania Aalen
Fecha de publicación:  más de 1 mes
Id. de stock del vendedor:  3080
Descripción
Dimensiones totales:  7 m × 7 m × 2.8 m
Estado
Estado:  usados
Información adicional
Color:  verde

Información adicional — Fresh HB Groep equipo de secado

Alemán
No. 3080
Fresh exhaust air drying chamber / heat treatment plant HB Groep
Sales on behalf of customers
used, year of construction 2004
for drying and IPPC treatment of wood
With direct gas heating, no water connection required
Stack dimensions measured WDH approx. 7000 x 7000 x 2800 mm
Anteroom for heating and control WD approx. 2350 x 7250 mm
Clear entrance: WH 6800 x 2800 mm
Loading by forklift.
Cross ventilation and reversible air blowing device of the circulation fans.
- Incl. gas burner 350 KW, for direct heating of the drying room
The plant was mainly used by the previous owner for the IPPC treatment of wooden pallets. It only took about 30 minutes for each full load!
- 2 x 2 aluminum supply/exhaust air flaps
- 4 high-performance axial fans for reversible air direction, type HB 78-10-4
Air performance 30,000 m3 / hour per piece, each 3 KW
The direct gas heating is installed above the false ceiling and behind the circulating air fans. Firing takes place in an approx. 2 m long stainless steel tube with control flaps for the warm air. The burner is controlled automatically via the controller. Output approx. 350 KW, heating medium propane gas.
- Combination control for drying / heat treatment type HB 900
Automatic control, equipped with software for evaluating and documenting the measured values for the heat treatment. 5 warm sensors to determine the core temperature. The actual heat treatment process is only started and ended automatically after the specified core temperature has been reached on all 5 sensors and the preset holding time. The measurement data is transferred to the on-site PC and can then be saved or printed out.
Self-supporting construction with sandwich panels, inside and outside with aluminum panels. The gap is filled with 10 cm thick, non-flammable mineral wool.
The insulation is resistant to steam or water penetration and has a K value of 0.32 kcal/sqm. The connection of the wall elements is permanently resistant to strong temperature loads and fluctuations.
Interior dimensions: BTH 7.0 x 7.0 x 3.9 m (2.8 m to false ceiling)
External dimensions: BTH 9.8 x 7.2 x 4.1 m including control room
Gate dimensions WxH 6.9 x 2.85 m
Aluminum frame construction lift and slide gate
Two inspection doors on the chamber side
Completely bolted construction, no cutting or flexing when dismantling.
Sales on behalf of customers, from the Baden-Württemberg location
In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended
Sale takes place in the ACTUAL condition
Technical information, description of condition, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee
Subject to prior sale
Any warranty is excluded for used machines. The rule is "bought as seen".
Terms of payment: Prices plus statutory VAT, payment before pickup or shipping
Terms of delivery: ex warehouse or location
Our terms and conditions apply, which can be viewed on the Internet at
www.kauz-maschinen.de
Pay particular attention to Article 9 regarding complaints and returns!